Final Gear Oil - Yamaha WOLVERINE R-SPEC YXE70WPAJ Owner's Manual

TIP
Be sure to wipe off spilled oil on any parts af-
ter the engine and exhaust system have
cooled down.
14. Start the engine, and then let it idle for
several minutes while checking it for oil
leakage. If oil is leaking, immediately turn
the engine off and check for the cause.
15. Turn the engine off, wait at least 10 minu-
tes, and then check the oil level and cor-
rect it if necessary.
16. Install the rubber cover.
17. Install the passenger seat cushion.
EBU36051

Final gear oil

Check the oil level and change the final gear
oil at the intervals specified in the general
maintenance and lubrication chart.
ECB03590
NOTICE
When checking or changing the final gear
oil, make sure that no foreign material en-
ters the final gear case. If necessary, clean
the final gear oil filler bolt and surrounding
area.
Recommended oil:
SAE 80 API GL-4 Hypoid gear oil
Oil quantity:
0.64 L (0.68 US qt, 0.56 Imp.qt)
Checking the final gear oil level
1. Park the vehicle on a level surface.
2. Remove the final gear oil filler bolt and its
gasket, and then check the oil level in the
final gear case. The oil level should be at
the brim of the filler hole.
8-20
8