1. Differential gear oil drain bolt
2. Gasket
4. Install the differential gear oil drain bolt
and its new gasket, and then tighten the
bolt to the specified torque.
Tightening torque:
Differential gear oil drain bolt:
9.8 N·m (0.98 kgf·m, 7.2 lb·ft)
5. Refill the differential gear case with the
recommended oil.
TIP
GL-4 is a quality and additive rating; GL-5
rated hypoid gear oils may also be used.
If desired, an SAE 80W-90 hypoid gear oil
may be used instead.
2
6. Check the oil filler bolt gasket for dam-
age, and replace it if necessary.
1
7. Install the differential gear oil filler bolt
and its gasket, and then tighten the bolt
to the specified torque.
Tightening torque:
Differential gear oil filler bolt:
23 N·m (2.3 kgf·m, 17 lb·ft)
8. Check for oil leakage. If oil leakage is
found, check for the cause.
8-24
8