1. Brake light switch
2. Adjusting nut
If necessary, adjust the brake light switch.
1. Hold the brake light switch in place.
8
2. Turn the adjusting nut in direction (a) to
make the brake light come on earlier.
3. Turn the adjusting nut in direction (b) to
make the brake light come on later.
EBU35930
1 2
Cable inspection and lubrication
EWB03380
(b)
Damaged cables could restrict operation,
which may cause an accident or injury. In-
(a)
spect control cables frequently and re-
place damaged cables. Corrosion can
result when the outer covering of control
cables becomes damaged. Cables can
also become frayed or kinked.
Lubricate the cable ends. If the cables do not
operate smoothly, ask a Yamaha dealer to re-
place them.
Recommended lubricant:
EBU32570
Brake pedal and accelerator pedal lu-
brication
Lubricate the pivoting parts.
8-43
WARNING
Yamalube LubezAll (synthetic lubricant
spray with PTFE)