2-17. CPU
(PCV-RX360DS)
1 heat sink holder
Precaution on mounting the heat sink holder:
Check that the angle B shown in figure does not exceed 90 degrees,
when the heat sink was removed or if the heat sink mounting failed.
If over 90 degrees, bend it to recover the original condition (within 90
degrees).
Do not reuse the heat sink holder that deformed over 120 degrees, and
use a new part.
(PCV-RX370DS/RX380DS)
3 DC fan
(with heat sink)
2 clip
2 clip
4 CPU
2 heat sink
B
5 CPU
4 Elect the lever
in the direction of arrow A .
2-11
3 Elect the lever
in the direction of arrow A .
A
1 harness
A
PCV-RX360DS/RX370DS/RX380DS (UC)
Confidential