Honda HRS536C Owner's Manual page 17

4. PRE-OPERATION CHECKS
Cutting Height
ADJUSTMENT LEVERS
Check the mower deck cutting
height settings, and be sure that
all four adjustment levers are set
to the same cutting height
position. The lowest setting is
approximately 25 mm and the
highest setting is 90 mm. Each
position increments about 13 mm.
To adjust cutting height, pull each
adjustment lever toward the
ADJUSTMENT LEVERS
wheel, and move it into another
notch.
If you are not sure what cutting
height to select, start with a high
setting and check the appearance
of the lawn after mowing a small
area. Then readjust cutting height
if necessary.
16
E