Honda HRS536C Owner's Manual page 11

3. CONTROLS
Flywheel Brake Lever
This lever is connected to the
engine flywheel brake and the
ignition switch. The engine will not
start unless this lever is pulled
backward.
Drive Clutch Lever (SD)
The drive clutch lever engages
(push forward) and disengages
(release) the transmission that
drives the rear wheels. The drive
clutch lever should only be
engaged after the engine has
been started.
Cutting Height Adjustment Levers
There are six approximate settings 25 ~ 87 mm. The adjusters move
back to lower and forward to raise the mower deck. For the best
overall lawn finish, each wheel should be adjusted to the same
position.
10
25 mm
37 mm
50 mm
66 mm
75 mm
87 mm
REAR ADJUSTMENT LEVER
RIGHT SIDE SHOWN
FLYWHEEL BRAKE LEVER
DRIVE CLUTCH LEVER (SD)
FRONT
ADJUSTMENT
LEVER
E