Installation - Bushnell Yardage Pro XGC User Manual

Yardage Pro XGC Sync

Installation

Installation
Follow these instructions to assist in the proper and complete installation of the Yardage
Pro XGC Sync application software on your computer. Confirm the XGC is NOT
connected with the USB cable to the computer before beginning the installation.
To install Yardage Pro XGC Sync on a Windows Vista, Windows XP,
Windows 2000 or Mac OS X computer:
1. Insert CD included with the product into computer.
2. Open appropriate CD drive to view contents.
3. Select "Bushnell Yardage Pro XGC Sync Installer" to launch program.
4. Select "USB Driver Setup" to install required drivers.
5. Select "Sync Application" to install sync software.
6. Launch software from "Bushnell Yardage Pro XGC Sync" icon on desktop.
Note: If you experience any problem with the installer (make sure you try restarting
your computer first), click the "Product Support" link at http://www.bushnellgolf.com/
gps/yardage_xgc_support.cfm, and download and install the latest version of the
Yardage Pro XGC Sync application.
*Windows is a registered trademark of Microsoft Corporation in the United States
and other countries. Mac and Mac OS are trademarks of Apple Inc., registered in
the U.S. and other countries.
22
User Manual