Samsung ML-2250/XBG Service Manual page 66

6.3 Clearing Paper Jams
Occasionally, paper can be jammed during a print job. Some of causes include:
• The tray is loaded improperly or overfilled.
• The tray has been pulled out during a print job.
• The front cover has been opened during a print job.
• Paper that does not meet paper specifications has been used.
• Paper that is outside of the supported size range has been used.
If a paper jam occurs, the On Line/Error LED on the control panel lights red. Find and remove the jammed
paper. If there is no paper visible look inside the printer.
Do not use tweezers or other sharp metal tools when removing a jam. You may damage the toner cartridge,
fuser rollers or potentially damage wiring insulation leading to an electric shock..
Note If, when removing jammed paper, the paper tears ensure that ALL fragments of paper are removed from
the printer otherwise a jam will re-occur.
6.3.1 In the Paper Exit Area (JAM2)
1) If the paper jams as it exits to the output tray and a
long portion of the paper is visible, pull the paper
straight out.
When you pull the jammed paper, if there is resis-
tance and the paper does not move immediately, stop
pulling. Continue with the next step.
2) Open the rear output tray.
Samsung Electronics
3) Loosen the paper if it is caught in the feed rollers.
Then pull the paper gently out.
Note: Please be careful when you open the rear cover.
The inside of the printer is still hot.
4) Close the rear output tray. Open and close the front
cover. Printing can be resumed.
Caution: paper jammed in this area is very close to the
fuser. This can be extremely hot. Take care
not to get burned.
Alignment & Adjustments
Service Manual
6-7