Samsung ML-2250/XBG Service Manual page 50

5.11 Fuser Ass'y
1. Before you remove the Fuser Ass'y, you should
remove:
-Rear Cover
2. Unplug the four connectors from the Main PBA
and SMPS, as shown below. Then remove the
four screws securing the Fuser Ass'y and
remove it.
3. Remove the two screws securing the Thermostat.
Then lift the Thermostat out.
Samsung Electronics
Fuser Ass'y
Thermostat
Disassembly and Reassembly
4. Remove the two screws securing the Halogen
Lamp. Then take out the Halogen Lamp from
the Heat Roller, as shown below.
Halogen Lamp
5. Remove four screws securing the Fuser Cover
and two screws securing the Guide Input to
dismantle the fuser unit..
Claw
Fuser Cover
Service Manual
5-11