KitchenAid YKFED500EBS User Instructions page 18

Double oven
Table of Contents

Advertisement

Available languages

Available languages

The oven lights are standard 40-watt appliance bulbs. Before
replacing, make sure the oven and cooktop are cool and the
control knobs are in the Off position.
To Replace:
1. Unplug range or disconnect power.
The range is designed to not need the oven doors removed
for standard usage and cleaning, however, they can be
removed if necessary.
Do not lift or move the range by the door handle(s).
Prepare a surface where you will place the door(s). This
surface should be flat and covered with a soft blanket, or
use the corner posts from the packaging material.
A. Oven door hinge in the
unlocked position
B. Oven door hinge in the
unlocked position
Partially close the door to engage the
door latch locks. The door will stop at
this point.
18
Oven Lights
2. Turn the glass bulb cover in the back of the oven
3. Turn bulb counterclockwise to remove from socket.
4. Replace bulb, and then bulb cover by turning clockwise.
5. Plug in range or reconnect power.
Remove Oven Door(s)
A
B
counterclockwise to remove.
Use two hands to remove and replace the
oven door(s). It may be necessary to gently
shift door from side to side.
A. Slot in the oven frame for the
door hinge lock
To replace the oven door(s), locate the slots in the oven
cavity for the hinge locks and repeat the steps above in
reverse order. Make sure the door closes properly and there
is no interference from the door latch. If necessary, remove
the door and repeat the steps above. If power is connected
to the range, open and close the door to make sure the oven
light comes on and goes off appropriately.
Follow the installation instructions found in the bag
containing the literature.
A

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kfed500ewhYkfed500essKfed500ess

Table of Contents