Cpu Installation - Biostar M7SUA User Manual

CPU Installation

Step1:
Pull the lever sideways away from the socket and then raise the lever up to a
90-degree angle.
Step2:
Look for the white dot/cut edge. The white dot/cut edge should point towards the
lever pivot. The CPU will fit only in the correct orientation.
Step3:
Hold the CPU down firmly, and then close the lever.
Step4:
Put the CPU fan on the CPU and buckle it. Connect the CPU fan power cable to
the JCFAN1. This completes the installation.
Step1
CPU Fan Headers: JCFAN1
3
1
JCFAN1
System Fan Headers: JSFAN1
1
JSFAN1
Step2 Step3
Pin No.
1
2
FAN R.P.M. Sense
3
Pin No.
1
2
FAN R.P.M. Sense
3
5
Step4
Assignment
Ground
+12V
Assignment
Ground
+12V