Registering The Handset To The Base - VTech ErisTerminal VSP600A User Manual

Registering the handset to the base

The handset must be registered to the base station in order to make and receive
calls.
To register the handset:
1. Make sure the handset has a charged battery before
proceeding. Make sure the base station is connected to power.
2. Press MENU on the handset. The Main Menu appears.
3. Press to scroll to User settings and press SELECT.
q
to scroll to Registration and press SELECT.
4. Press
q
5. With Handset highlighted, press SELECT. The handset
screen displays instructions. Press
reading the instructions.
6. On the base station, press the HANDSET LOCATOR button
for at least four seconds, then release the button. Both LEDs
on the base station begin to flash.
7. Press the # key on the handset to begin registration.
screen shows Please wait...
seconds to complete.
When the first handset registers, it beeps and the screen
displays HANDSET 1.
If the handset fails to register, place it in the charger again for a
few seconds, remove it and repeat the registration procedure.
to continue
NEXT
The process takes up to 10
HANDSET 1
11:26PM 01/01
LINE MENU
21
The