Projector Management Using Snmp - Dukane 8133WISS User Manual

8.2 Projector Management using SNMP

projector information, which is a failure or warning status, from the computer on
the network.
NOTE
administrator.
Standard MIB (MIB-2)
Item
sysName
sysContact
Enhanced MIB
Projector Web Control.
Trap
Item
Cold Start
Authentication Failure
Projector name is set.
The information on where it is located. It has character string
Settings] - [Common Setup].
The information on the administrator's contact information. It
Web Control - [Network Settings] - [Common Setup].
When the projector is supplied with the power, it works as
below.
"Standby state".
community.
8. Other Functions
Description
88), the following
Description
91