3.5 How to Install the Memory Modules
(DDR4 (1.2V))
1. The NUC BOX 8265U/8365UE requires DDR4 SO-DIMM (1.2V).
2. For dual channel configuration, you always need to install identical (the same brand,
speed, size and chip-type) DDR4 SO-DIMM pairs.
The SO-DIMM only fits in one correct orientation. It will cause permanent damage to the
motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.
1. Carefully insert the SO-DIMM memory modules into the slot at a 30-degree angle.
2. Push down until the modules snap into place.
14