Network Transfer Rate; Finishing Up - ATEN CL5716I User Manual

CL5708I / CL5716I User Manual
IPv6 Settings
IP Address:
IPv6 is the new (128-bit) format for specifying IP addresses. (See IPv6,
page 221 for further information.) The KVM over IP switch can either
have its IPv6 address assigned dynamically (DHCP), or it can be given
a fixed IP address.
For dynamic IP address assignment, select the Obtain IP address
automatically [DHCP] radio button. (This is the default setting.)
To specify a fixed IP address, select the Set IP address manually
[Fixed IP] radio button and fill in the fields with values
appropriate for your network.
DNS Server
For automatic DNS Server address assignment, select the Obtain
DNS Server address automatically radio button.
To specify the DNS Server address manually, select the Set DNS
server address manually radio button, and fill in the addresses for
the Preferred and Alternate DNS servers with values appropriate
for your network.
Note: Specifying the Alternate DNS Server address is optional.

Network Transfer Rate

This setting allows you to tailor the size of the data transfer stream to match
network traffic conditions by setting the rate at which the KVM over IP switch
transfers data between itself and the client computers. The range is from 4–
99999 Kilobytes per second (KBps).

Finishing Up

After making any network changes, be sure Reset on exit on the Maintenance
→
System Operation page (see Reset on exit:, page 164) has been enabled
(there is a check in the checkbox), before logging out. This allows network
changes to take effect without having to power the switch off and on.
136