Mx Onda MX-HC2178 Instruction Manual page 57

Note:
Anytime you can increase or decrease the timer, simply turn it to the left or
right to decrease or increase the time respectively.
Function selector
The selector has 4 positions, which are indicated in the following table together
with the function they perform:
POSITION
1
2
3
4
Operating indicator and interior light
When the timer is counting down (a time has been selected), the operation
indicator as well as the interior light will illuminate to warn that the oven timer is
running.
Sleep mode or off
When you do not use the oven, you must place the controls in the off position,
to do this turn the function selector to the OFF position, the timer must be in
position 0.
TIPS
Before entering the food we recommend to preheat the oven.
Use containers suitable for ovens (resistant to high temperatures).
The time required for the cooking depends on the size and quality thereof.
Try not to open the oven door as little as possible, use the window of the
oven door to check the process. It will save time and energy.
The system convection distributes heat inside the furnace and the
temperature of food by accelerating the cooking process. Until you become
familiar with the system by convection, not neglect the process, it may
happen that the cooking time decreases.
You should also leave a space of at least 3 cm between the container and
the walls of the oven, to allow hot air flow.
The weight of food deposited on the grill or in the enamel tray should not
exceed approximately 2 kg.
SYMBOL
OFF
FUNCTION PERFORMING THE OVEN
Sleep mode or off
Heat on top
Heat at the bottom
Heat at the top and bottom
7