Belkin F9K1102V3 User Manual page 37

Click "Apply Changes" to finish. Your wireless activity is now
5)
encrypted. Each computer using your wireless network will
need to use the new key.
Note: If you are configuring the Router over a wireless
connection, you will have to re‐connect to the Router after
changing any security settings.
Note: Some older networking hardware supports only 64‐bit
WEP encryption. If your older computers cannot connect to
your network, try 64‐bit WEP.
A disk I plugged into the USB port is not showing up on my computer or in
Memory Safe.
1) Is the light on over the USB port that the disk is plugged into?
If not, try unplugging and re‐plugging the disk. Please check
that the USB connector is firmly plugged into the Router.
2) If your disk has an optional power supply, please use it while
the disk is attached to your Router.
3) The Router supports FAT16, FAT32‐, or NTFS‐formatted disks.
Disks in other formats will not appear in the Finder (Mac OS
X) or Windows Internet Explorer®.
A disk I plugged into the USB port is not coming on or remains on only for a
short time.
Some drives require more power than the Router's USB port provides. If
your disk has an optional power supply, please use it while the disk is
attached to your Router.
A printer I plugged into the USB port is not showing up on my computer.
1) Is the light on over the USB port that the printer is plugged
into? If not, try unplugging and re‐plugging the printer.
Please check that the USB connector is firmly plugged into
the Router.