Belkin F9K1102V3 User Manual page 10

The status of your Internet connection is shown in the upper right
corner of the router homepage. If after a few moments it says
"Connected," you're done! You can surf the Internet.
– see "Tested QIG 2011 07
[Image of browser showing "connected" homepage
14.pdf" provided for guideline]
If not, select "Connection Type" from the menu on the left.
[Zoomed in image of the "Connection Type" option in the
homepage – see "Tested QIG 2011 07 14.pdf" provided for
guideline]
If a password screen appears, press "Submit."
[Image of the login screen showing the submit button – see
"Tested QIG 2011 07 14.pdf" provided for guideline]
Dynamic Connection
Cable and fiber customers generally require a dynamic
connection. Some DSL customers require a PPPoE
connection. Let's try dynamic first. Select "Dynamic" from the
menu that appears and press "Next."
[Image of the connection type screen with dynamic selected – see
"Tested QIG 2011 07 14.pdf" provided for guideline]
A service name is generally not required. Hit "Apply Changes."
The Router will restart.
[Image of the service name page – see "Tested QIG 2011 07
14.pdf" provided for guideline]