System Requirements; Using Your Router; Enabling Auto Update On Your Router - Belkin F9K1102V3 User Manual

System Requirements

Router
Broadband Internet connection such as a cable or DSL modem with RJ45
(Ethernet) connection
At least one computer with an installed network interface adapter
TCP/IP networking protocol installed on each computer
RJ45 Ethernet networking cable
Internet browser
Setup Software
A computer running Windows® XP SP3 or higher, Windows Vista®, or
Windows 7; or Mac OS® X v10.5 or above
Minimum 1GHz processor and 512MB RAM
600MB of free hard-drive space for installation
Memory Safe and USB Print and Storage Manager
Windows XP SP3 or higher, Windows Vista, or Windows 7; or Mac OS X
v10.5 or above only
Minimum 1GHz processor and 512MB RAM
50MB of free hard-drive space for installation

Using Your Router

Enabling Auto Update on Your Belkin Router
The Router has the capability to automatically check for a newer version of firmware and alert
you when it's available. You can choose to download the new version or ignore it. By default
this feature is disabled. If you want to enable it, select "Enable" and click "Apply Changes".
Note: We recommend you use a computer that has a wired connection to the Router.
Setup steps:
Open a web browser on the computer.
1.
In the address bar of the web browser, type "http://192.168.2.1".
2.
Click "Login" in the upper right-hand corner of the page. The Router does not ship with a
3.
password, so just click "Submit".
Click on "System Settings" in the left-hand column under the "Utilities" heading.
4.