Table of Contents
Advertisement
Advanced Setup,
Continued
Hit <DEL> Message Display Set this option to Disabled to prevent
Hit <DEL> if you want to run Setup
from appearing when the system boots. The settings are Enabled or Disabled.
The Optimal and Fail-Safe default settings are Enabled.
Wait for <F1> If Error AMIBIOS POST runs system diagnostic tests that can generate a
message followed by:
Press <F1> to continue
If this option is set to Enabled, AMIBIOS waits for the end user to press
<F1> before continuing. If this option is set to Disabled, AMIBIOS continues
the boot process without waiting for <F1> to be pressed. The settings are
Enabled or Disabled. The Optimal and Fail-Safe default settings are Enabled.
Display BIOS POST Messages Set this option to Yes to display all BIOS messages when the
system BIOS Power On Self Test (POST) runs before the operating system is
booted. The settings are:
Setting
Yes
The messages that AMIBIOS displays before booting the
system will appear on the system monitor.
No
The messages that AMIBIOS displays will not appear on the
system monitor.
Display Add-On ROM Messages Set this option to Yes to display the AMIBIOS POST
messages related to Option ROMs (Add-On ROMs). The settings are:
Setting
Yes
No
Chapter 2 WINBIOS Setup
Description
Description
Any optional option ROM messages are displayed.
Optional option ROM messages are not displayed.
39
Cont'd
Advertisement
Table of Contents
