LG STB-5500-GB.AAU Owner's Manual page 3

• Install the product where no radio wave occurs.
• Make sure to connect Mains cable to compliant AC mains socket with Grounded earth pin. (Except for devices which are
not grounded on earth.) Otherwise possibility you may be electrocuted or injured.
• Insert power cable plug completely into wall socket otherwise if not secured completely into socket, fire ignition may
break out.
• Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or covered with dust, dry the power plug
completely or wipe dust off. You may be electrocuted due to excess moisture.
• If you don't intend to use the product for a long time, unplug the power cable from the product.
- Covering dust can cause a fire, or insulation deterioration can cause electric leakage, electric shock or fire.
• Never touch this product or antenna during a thunder or lighting storm.
- You may be electrocuted.
• Do not insert any metal objects/conductors (like a metal chopstick / cutlery / screwdriver) between power cable plug and
input Wall Socket while it is connected to the input terminal on the wall. Additionally, do not touch the power cable right
after plugging into the wall input terminal. You may be electrocuted.
• DISCONNECTING DEVICE FROM MAINS
- Mains plug is the disconnecting device. The plug must remain readily operable.
• Make sure to turn off the product. Make sure to remove all cables before moving the product.
- You may be electrocuted or the product can be damaged.
• Do not disassemble, repair or modify the product at your own discretion.
- Fire or electric shock accident can occur.
- Contact the service centre for check, calibration or repair.
• Do not spray water on the product or scrub with an inflammable substance (thinner or benzene). Fire or electric shock
accident can occur.
• To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Apparatus shall not be
exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
• Do not put heavy objects or many objects on the product.
- It may disable normal wireless connection with the Monitor or cause problem to the product.
• Do not allow any impact, shock or any objects to fall into the unit, and do not drop anything onto the screen.
- You may be injured or the product can be damaged.
• In the event that an image does not appear on the screen please switch it off and unplug it from the mains supply and
contact your service centre.
- This may cause a fire or electric shock hazard.
• Never touch the wall outlet when there is leakage of gas, open the windows and ventilate.
- It may cause a fire or a burn by a spark.
• Do not place anything containing liquid on top of the product such as flowerpot, cup, cosmetics or candle.
- This may cause a fire hazard.
• If water is split into the product, unplug it from the mains supply outlet immediately and consult your service centre.
- This may cause an electric shock hazard.
• Do not install this product on a wall if it could be exposed to oil or oil mist. This may damage the product and cause it to
fall.
• Make sure the product ventilation hole is not blocked. Install the product in a suitably wide place (more than 10cm from
the wall).
- If you install the product too close to the wall, it may be deformed or fire can break out due to internal heat.
3