Advertisement
Wiring
Green/Yellow
Stripe
Refer to CAUTION c.1 on pg. 2
Note: To connect the wires, hold the bare metal
leads together and place a wire connector over
them, then twist clockwise until tight.
Using an orange wire
connector from
the
hardware bag,
connect the 3 grounding
wires (green, green/
yellow stripe, or bare
copper) coming from the
ceiling, downrod, and
hanging bracket.
9
M3572-01 • 04/09/18 • © Hunter Fan Company
www.HunterFan.com
the
the black wire (ungrounded)
Turn the splices upward and push them carefully back through the hanger bracket
into the outlet box. Spread the wires apart, with the grounded wires on one side of
the outlet box and the ungrounded wires on the other side of the outlet box.
1.888.830.1326
Using the orange wire
connectors from
hardware bag, connect
from the ceiling to the black
wire from the fan. Connect
the white wire (grounded)
from the ceiling to the white
wire from the fan.
Advertisement
