Advertisement
Downrod (continued)
KEEP!
Remove the pre-installed
setscrew so that the downrod
can be inserted.
Tip: If you have
difficulty feeding the
wires through the
downrod, try taping the
wires to a thin dowel
rod, then drop the dowel
rod and wires through
the downrod. Be sure to
remove all tape once the
wires are fed through to
the other side.
Hand tighten the downrod (at
least 4-5 full turns) until it stops.
8"
M3572-01 • 04/09/18 • © Hunter Fan Company
3/8"
8"
The wires can be cut, but
leave at least 8" extending
from the top of the downrod.
7
www.HunterFan.com
1.888.830.1326
Tighten the setscrew
with pliers. DO NOT
HAND TIGHTEN.
3/8"
If the setscrew is not tightened
securely, the fan may fall.
Advertisement
