Paper Jam In Mp Tray - Samsung ProXpress M387 Series Service Manual

Mono laser mfp
Hide thumbs Also See for ProXpress M387 Series:
Table of Contents

Advertisement

4. Alignment and Troubleshooting
► Error Code
M1-1610
► Error message

Paper Jam in MP tray.

► Symptom
The jammed paper has occurred in the MP tray.
► Troubleshooting method
1) Clear the jammed paper. (Refer to 4.1.3)
If the problem persists, check the following.
2) Turn the machine off.
3) Remove the right cover.
4) Check if the MP Unit connector is connected properly.
5) Remove the MP Unit. (Refer to 3.3.19)
6) Check if the MP rollers are worn out. If necessary, replace the defective roller or MP unit.
4-57
Copyright© 1995-2013 SAMSUNG. All rights reserved.

Advertisement

Table of Contents
loading

Table of Contents