Acer Aspire G600 User Manual page 42

40
Choosing N returns you to the Main menu without
loading the default settings.
The default setup values may not be the best setting
for your mainboard, but these values are considered
reliable settings, especially if you have limited
loading of add-on cards and memory size (for
example, a system that contains only a VGA/sound
card and two DIMMs).
To attain the best system performance, you may
manually set the parameters in the Advanced Chipset
Features submenu to get the proprietary settings.
Make sure that you know and understand the
functions of every item in this submenu before
changing any configuration setting.
Set Supervisor Password
The Set Supervisor Password function of the Main
menu allows you the option to set a password that
will be required for a user to enter the Setup utility
and modify configuration settings.
To set the Supervisor password:
1. Select Set Supervisor Password from the Main
menu.
2. On the "Enter Password" message window, type a
password then press Enter. The password may consist
of up to six alphanumeric characters. When you type
the characters, they appear as asterisks.
3. You will be prompted to confirm the password.
Retype the password then press Enter. After the
password entry, the screen automatically reverts to
the Main menu.
When a password is enabled, you can also have the
BIOS request a password each time the system is
booted. This would prevent unauthorized use of your
computer. The parameter to determine when the
password prompt is required in the Password Check
option. If the Password check option is set to