Changing The Oven Light Bulb - CDA SL100SS Use And Maintenance

Changing the oven light bulbs
Important:
Before any maintenance is started involving electrical parts, the
appliance must be disconnected from the power supply.
If the oven has been in use, let the oven cavity and the heating
elements cool down before attempting any maintenance.
Never use screwdrivers or other utensils to remove the light cover.
This could damage the enamel of the oven or the lamp holder.
Remove only by hand.
Never replace the bulb with bare hands as contamination from
your fingers can cause premature failure. Always use a clean
cloth or gloves. Old bulbs may also be hot!
Changing the bulb (Fig. 9)
• Remove any cookware, shelves and shelf supports as shown
on page 16
• Carefully detach the glass cover by
applying pressure with your thumb to
one side whilst holding the other side
with your fingers.
• Carefully remove the old bulb and
insert a new bulb suitable for high
temperatures (300°C) of the following
specification; 230-240V~, 50Hz, 25W,
G9 fitting
• Refit the glass cover
Please note:
The bulb replacement is not covered by
your guarantee.
Fig. 9
Instruction Manual | 17