Table of Contents
Advertisement
Changing the oven light bulb (SK420)
Important:
•
Before any maintenance, the appliance must be disconnected
from the power supply. If the oven has been in use, let the oven
cavity and the heating elements cool down before attempting
any maintenance.
•
Never use screwdrivers or other utensils to remove the light
cover. This could damage the enamel of the oven or the lamp
holder. Remove only by hand.
•
Never replace the bulb with bare hands as contamination from
your fingers can cause premature failure. Always use a clean
cloth or gloves. Old bulbs may also be hot!
1
Remove all shelves and the grill pan from the oven.
2
Gently unclip the shelf support from its lower locating stud and
unhook the top to remove it. No tools are required here and the
stud should not be removed.
3
Carefully detach the glass cover from the lamp housing by sliding it
upward and then easing the bottom outward.
4
Carefully remove the old bulb and insert a new bulb suitable for
high temperatures (300°C) of the following specification; 230-
240V ~ , 50 Hz, 25W, G9 fitting.
5
Reattach the glass cover, pressing it firmly into position.
6
Replace the shelf support by locating the two hooks at the top and
clipping it into position on the fixing stud.
7
Replace all shelves and the grill pan as necessary.
Please note: The bulb replacement is not covered by your guarantee.
24
Advertisement
Table of Contents
