CDA SL100SS Use And Maintenance page 14

Cleaning and maintenance
Important: Do not disassemble
the door without it having been
removed from the oven. Weight
differences could cause the door to
snap shut, causing damage to the
oven and/or the user
Removing the inner door glass
With the door removed, the inner
glass can also be taken out for
cleaning purposes.
• Squeeze the locking tabs on
either side of the oven door,
freeing the door slat as per fig. 4
• Remove the door slat, as per fig.
5, and place it somewhere safe
where it will neither receive nor
cause damage
• Remove the inner glass from
the blocks it is seated within
(near to the hinges) and place
this somewhere safe also. Pay
attention to the way that the glass
is facing as it will need to be
replaced in the same direction.
The smooth surface of the glass
should be facing upwards (inwards
if the door was back in place) with
the patterned side facing the oven
door handle
• Clean the door glass with warm, soapy water and wipe dry with a
clean microfibre cloth
14 | Instruction Manual
Fig. 4
Fig. 5