3無
Press p or q to highlight the video source you
want to label.
4無
Press t or u to select the desired label for that
input source. If a particular input is not used, you
can select Hide as the label, which will cause that
input to be "grayed out" in the Input Selection
screen and skipped over when you press
the remote control.
5無
To save the new input labels, highlight Done and
press
.
To revert to the factory default labels, highlight
Reset and press
.
Input labeling example:
The screen below left shows the default Input Selection
screen (with none of the inputs labeled as a specific
device). The screen below right is an example of how
you could label the inputs if you connected a VCR to
ColorStream HD, a video recorder to HDMI 1, and a
DVD player to HDMI 2.
Input Selection screen
with no inputs labeled.
To clear the input labels:
1無
and open the Preferences menu.
Press
2無
Highlight Input Labeling and press
3無
Highlight Reset and press
Chapter 6: Using the TV's features
Tuning channels
Tuning channels using the
Channel Browser
The Channel Browser
interface for all your channels and inputs. This
feature allows you to:
•
•
•
on
•
•
•
•
Favorites Browser
The Favorites Browser allows you to quickly set up a
favorite channels/inputs list that is integrated into the
Channel Browser
To add a favorite channel/input:
1無
2無
Note: Additions are added to the beginning of
Input Selection screen
the Favorites list on the left side of the Channel
with all inputs labeled.
Browser
To delete a favorite channel/input:
1無
2無
.
.
3無
To set up the Channel Browser
1無
2無
™
provides an easy navigation
™
Navigate the contents of all of your inputs.
Keep a list of your favorite channels (see
"Favorites Browser," below).
Keep a history of the last 32 channels or inputs
viewed.
Quickly surf and tune your recently viewed
channels/inputs from the Channel Browser
History List (illustrated on the next page).
Surf via Browse mode (to immediately tune
channels as you highlight them in the Channel
Browser
) or Select mode (to surf over channels
™
in the Channel Browser
™
before you select one to
tune).
Quickly change inputs from the Inputs List.
Quickly select REGZA-LINK devices from the
REGZA-LINK List.
.
™
Tune to the channel or input.
Press and hold
for 3 seconds.
.
™
Press
to open the Favorites browser list.
Highlight the channel or input to delete by
t or
u.
pressing
Press and hold
for 3 seconds. The channel/
input will be removed from the Favorites list.
From the Preferences menu, highlight Channel
Browser Setup and press
Press p to highlight Navigation, and then press
t or u to select either Browse Mode or Select
Mode.
™
:
™
.
(continued)
29