Table of Contents
Advertisement
STYLE 2
Digital Dial option is available on some models only.
Menu Guide
2:00
:15
1:00 - 2:00
:45
:30
1:30 - 2:30
0
15
30
45
10
9
8
7
6
3
5
4
20%
50%
70% 100%
20%
50%
70%
100%
The switching operation of this microwave oven can cause voltag
supply conditions can have adverse effects. This device is intended for the connection to a power supply system with a maximum permissible system
impedance Zmax of 0.2 Ohms at the interface point of the user's supply. The user has to ensure that this device is connected only to a power
the interface point.
A
C
1
15
DO NOT power spray
30
So...how do I use it?
45
Heating
2
1.
Open oven door, place food in oven, and close oven door.
2.
Select desired power level or use default 100%.
2.
Turn time entry knob clockwise to desired time.
• Cooking time can be set up to 10 minutes.
• Oven begins operation and time counts down.
3.
When cooking time has elapsed, microwave energy stops and oven signal sounds.
Interrupting Operation
Open oven door to interrupt operation or turn time entry knob counterclockwise to "0".
To resume microwave oven operation, close door, select power level pad, and turn knob.
Changing Time and Canceling Mistakes
Heating time and power level can be changed at any time while the oven is operating.
Press power level pad or turn knob to desired new setting. To set cooking time to zero,
turn knob counterclockwise to "0" or cycle door open and closed.
Changing Timer Option
Timer resetting to zero can be set at any time to pause current cook time and power level when door is
opened. To change this option follow the step below.
•
With door open press and hold the 100% pad
door this changes timer setting to pause current cook time and power level when door is opened.
Timer pausing current cook time and power level can be set at any time to reset to zero and 100%
power level when door is opened. To change this option follow the step below.
•
With door open press and hold the 20% pad
the door this changes timer setting to reset timer to zero and power level to 100% when door is
opened.
Digital Dial Operation
Oven Wall Clearances
A—Allow at least 2" (5.1 cm) of clearance around top of
oven. Proper air flow around oven cools electrical
Oven Wall Clearances
components. With restricted air flow, oven may not
A—For North American (UL/CSA) models, allow
operate properly and life of electrical parts is reduced.
at least 2" (5.1 cm) of clearance around top
of oven. For International (50 Hz) models,
B—There is not an installation clearance requirement for the
allow at least 12" (30 cm) of clearance
back of the oven.
B
C—Allow at least 1" (2.54 cm) of clearance around sides of
oven cools electrical components. With
oven.
D—Install combination oven so oven bottom is at least 3
properly and life of electrical parts is
feet (91.5 cm) above floor.
reduced.
B—Allow at least 2" (5.1 cm) between air
discharge on back of oven and back wall.
C—Allow at least 2" (5.1 cm) of clearance around
sides of oven.
No metal pans
(Electronic / Mechanical Dial)
for 5 seconds until beep is heard. Close the
100%
for 5 seconds until beep is heard. Close
20%
13
der unfavorable voltage
at
Advertisement
Table of Contents
