Operation Style 1 - Amana Heavy Duty Commercial Compact Owner's Manual

Operation
STYLE 1
Interrupting Operation
Open oven door or press STOP/RESET pad
interrupt operation. Display continues to show
countdown time. Close door and press START
to resume oven operation.
Canceling Mistakes
If oven is not cooking, press STOP/RESET
clear display. If oven is cooking, press STOP/RESET
pad once to stop oven, then again to clear display. If
oven door is open and time shows in display, close oven
door and press STOP/RESET pad to clear display.
Operating Preprogrammed Pads
From the factory, this oven can of store up to 10
preprogrammed cooking sequences in memory.
To heat using a preprogrammed sequence,
press a numbered pad. Oven starts to heat
automatically. Example: Heat using the third cooking
sequence.
1. Open oven door, place food in oven, and close oven
door.
• Display shows "READY".
• If pad is not pressed in 60 seconds, open and
close oven door again.
2. Press 3 pad.
• Oven operates and time counts down.
• Display shows cooking time, "STAGE 1",
"COOKING". Display shows "COOKING" only
when microwave energy is present.
• If power level other than 100 percent power
was programmed, display shows "STAGE 1",
"COOKING" and "% MW POWER".
• If additional cooking time is required, press
preprogrammed pads before or after cooking cycle
ends.
3. Oven stops cooking and oven signal sounds when
cooking timing elapses.
Preprogrammed Times and Cook Level
All preprogrammed pads arrive set at full power.
Double Pad Programs
The oven control can be changed to
store up to 100 cooking programs.
to
See the "User's Options" section of this
manual to change oven control.
pad
To start a double pad cooking program, press 2 memory
pads. For example, press pad 0 and pad 3 to start a
cooking program.
pad to
Manual Time Entry
Manual Time Entry feature allows the operator
to enter time and power levels, and heat without
changing the preprogrammed pads. Example: Heat for
30 seconds at 80% power.
1. Open oven door, place food in oven, and close door.
• Display shows "READY". Fan and light operate.
• If pad is not pressed in 60 seconds, open and
close oven door again.
2. press TIMe eNTrY
• Display shows "00:00" and "READY".
3. Press 3 and 0 pad to enter cooking time.
4. Press POWER LEVEL
power level.
• Display shows "% MW POWER" and current
power level if other than 100 percent power.
5. Press 8 pad to enter desired power level.
6. Press START
• Oven operates and time counts down.
• Display shows cooking time, "COOKING", "% MW
POWER".
• Display shows "COOKING" only when microwave
energy is present.
• If power level other than 100 percent power was
programmed, display shows "COOKING" and "%
MW POWER". Display counts down cooking time.
7. Oven stops cooking and oven signal sounds when
cooking timing elapses and display shows "DONE".
9
pad.
pad to change
pad.