Table of Contents
Advertisement
Keep Warm
(continued)
NOTES:
1. P0 (KEEP WARM) can be set
as the final stage after cook
time has been manually
entered. It cannot be used
with Automatic function
(such as Frozen Foods,
Sensor Cook (Reheat),
Popcorn, Coffee/Milk and
Turbo Defrost).
2. After pressing Start, the
selected power level can
be recalled. Hold Power
Level for 2 seconds, then the
display window will indicate
the power level and keep for
2 seconds.
F0003CK20AP_EN.indd 13
F0003CK20AP_EN.indd 13
Operation (continued)
Quick 30
(Set or add cooking time in
30 seconds increments)
1
Press Quick 30 until the
desired cooking time (up to
5 minutes) appears in the
display. Power Level is pre-set
at P10.
2
Press Start; the cooking will
start and the time will count
down in the display. At the
end of cooking, five beeps will
sound.
NOTES:
1. This function is not
available for Automatic
function (such as Frozen
Foods, Sensor Cook
(Reheat), Popcorn, Coffee/
Milk and Turbo Defrost). If
desired, you can use other
power levels. Select desired
power level before pressing
Quick 30.
2. After setting the time by
Quick 30 pad, you cannot
use the Number Pads.
3. Quick 30 pad can also be
used to add more time
during manual cooking.
Add Time
(This feature allows you to add cooking time at the end of previ-
ous cooking. )
1
After cooking, press Add Time.
2
Add cooking time by pressing
the Number pads. Maximum
cooking time: Microwave: P10
or P0 up to 30 minutes; other
powers up to 99 minutes and
99 seconds.
3
Press Start. Time will be added.
The time in the display window
will count down.
13
NOTES:
1. This function is not
available for Automatic
function (such as Frozen
Foods, Sensor Cook
(Reheat), Popcorn, Coffee/
Milk and Turbo Defrost).
2. The Add Time function will
be cancelled if you do not
perform any operation for
1 minute after cooking.
3. The Add Time function can
be used after the 3-stage
cooking.
4. The power level is the same
as the last stage.
2020/2/26 9:51:06
2020/2/26 9:51:06
Advertisement
Table of Contents
