Normal Mode With Triple Or Dual Watch; Normal Mode With Both Weather Alert And Triple Or Dual Watch; Scan Mode - Uniden UM435 Owner's Manual

Normal mode with Triple or Dual Watch

If you activate Triple Watch while operating in normal mode, the radio checks channels
16 and 9 every two seconds; with Dual Watch turned on, the radio only checks channel 16.
The radio will not check channels 16 or 9 while you are actively transmitting; it waits until
your transmission is finished and then checks the channels.
Press and hold 16/9-TRI (on the radio or the microphone) for two seconds to turn Triple/
Dual Watch on or off. (To change between Triple or Dual Watch, see page 13.)

Normal mode with both Weather Alert and Triple or Dual Watch

You can activate Weather Alert Watch and Triple or Dual Watch at the same time. The
radio performs both checks at their scheduled time. (To change between Triple or Dual
Watch, see page 13.)

SCAN MODE

You can save channels into memory and then use scan mode to monitor those channels.
When the radio detects a signal on a channel, it pauses on that channel as long as the signal
is received; when the transmission stops, the radio will continue scanning.
7