Kick Guardtm; Guide Bar; Saw Chain - Echo CS-400 Operator's Manual

CS-400
Use of replacement saw chain and/or guide bar other than that
specified, or operation without the optional Kick Guard
place, may cause severe kickback resulting in serious injury.
Chain and guide bar gauge size must be identical. Use Bar/Chain
combinations shown in table above.
TM
Kick Guard
(Optional)
To purchase an optional Kick Guard
name of the ECHO dealer nearest you, Call: 1-800-432-ECHO (3246) or on
the web at www.echo-usa.com

Guide Bar

(Low-kickback)
Replacement guide bars.
The following guide bars may be considered to have equivalent kickback
energy.
• Sprocket nose guide bars of the same length and nose radius, same pitch
and having the same number of teeth.
• Hard nose guide bars of the same length and nose radius as a sprocket
nose bar.

Saw Chain

(Low-kickback)
Only use saw chain designated as, "LOW-KICKBACK," that
meets ANSI B175.1 or CSA Z62.1, .3 Standard when tested on
the representative sample of chain saws below 3.8 C.I.D., and
ECHO guide bar specified.
X7503256004
© 08/2020 ECHO Incorporated
TM
contact your ECHO dealer. For the
OPERATION
TM
in
41