Echo CS-400 Operator's Manual page 33

CS-400
3. Move stop switch (A) UP to
"RUN" position.
4. Securely hold the chain saw as
shown and pull starter handle.
5. Choke may be used if necessary,
but after first starting sound,
squeeze throttle trigger to
release choke and return engine
to idle.
Note: If engine does not start
after 5 pulls, use cold start
procedure.
Note: Do not increase engine
speed while chain brake is
locked. Severe brake damage will result.
X7503256004
© 08/2020 ECHO Incorporated
OPERATION
A
33