Control and Monitoring (Continued)
Controlling ERV PLUS
1
Click [Control and Monitoring] when DMS2 web page menu screen appear.
[Control and Monitoring] screen will appear when you log-in to DMS2 web page.
Select ERV PLUS to control.
2
Check the status of ERV PLUS through the status display window.
When the selected ERV PLUS is switched on, the remote controller panel will be
automatically activated.
3
Turn the ERV PLUS on by clicking [
Remote controller panel will be activated.
Select the operation mode
4
You can select Auto, Cool, Off and Heat mode.
Note
The normal ERV PLUS control or monitoring is guaranteed when the
centralized controller is above MCM-A202D and the interface module is
MIM-B13D.
Refer to the 'Controlling ERV' for ERV PLUS control. (Page 39 ~ 40)
Refer to the 'Indoor unit operation mode limit' for ERV PLUS operation
mode limit. (Page 23 ~ 25)
ERV PLUS doesn't operate Fan mode, so it only operates cool mode in
'cool only' .
42
E-
ERV PLUS doesn't operate Fan mode, so it only operates heat mode in
'heat only' .
].