Sony PXW-Z190T Operating Instructions Manual page 124

System
Item Sub-items and Settings
DC Voltage DC Low Voltage1
11.2V to 14.0V (11.3V)
Alarm
DC IN input low-
DC Low Voltage2
voltage alarm
11.0V to 14.0V
settings
Menu Settings Direct Menu with <SET>
On / Off
Menu settings
User Menu Only
On / Off
User Menu with Lock
On / Off
Fan Control Setting
Auto / Minimum / Off in Rec
Fan control
settings
All Reset
Reset
Execute / Cancel
Factory default
reset
Reset without Network
Execute / Cancel
Option
Install Status
Upgrade license
MPEG HD
(option) check.
Installed / Not Installed
Network
Installed / Not Installed
Version Version Number
x.xx
Camcorder version
display
Version Up
Execute / Cancel
Description
Sets the voltage to display a DC IN low input voltage alarm
(0.1V increments).
Sets the voltage to display a DC IN input undervoltage alarm
(0.1V increments).
Sets whether to start direct menu operation by pressing the
SET button.
Note
• When set to On, registered face detection using the face
detection AF function becomes unavailable. Also, the
currently registered face is cleared.
Sets whether to display the User menu only (On) or display
the menu list (Off) when the camcorder displays the menu.
Sets whether to lock the menu display, showing the User
menu only.
Note
• In normal menu display operation, this item is not
displayed. For details about menu display operation, see
page 86.
Selects the fan control mode.
Resets the camcorder to the factory status.
Execute: Execute function.
Resets the menu settings, excluding the Network menu
settings, to the factory default state.
Execute: Execute function.
Displays the installation status of the MPEG HD upgrade
license.
Installed: Installed
Not Installed: Not installed
Displays the installation status of the NETWORK upgrade
license.
Installed: Installed
Not Installed: Not installed
Displays the software version of the camcorder.
Upgrades the camcorder.*
Execute: Execute function.
* This function updates the software of the camcorder.
124