Sony PXW-Z190T Operating Instructions Manual page 115

Network
Item Sub-items and Settings
ST Mode
Manual Register
Settings
SSID
Station mode
Security
connection settings
None / WEP / WPA
Password
DHCP
On / Off
IP Address
Subnet Mask
Gateway
DNS Auto
On / Off
Primary DNS Server
Secondary DNS Server
Wired LAN Setting
On / Off
Wired LAN
connection settings
Camera Remote Control
Enable / Disable
Note
Detail Settings
• This item is
DHCP
displayed when
the NETWORK On / Off
upgrade license
IP Address
(option) is
installed.
Subnet Mask
Gateway
DNS Auto
On / Off
Primary DNS Server
Secondary DNS Server
Modem
Setting
On / Off
Modem/
smartphone
Modem1 Device Name
settings
Modem1 IP Address
Note
Modem1 Subnet Mask
• This item is
Modem2 Device Name
displayed when
Modem2 IP Address
the NETWORK
Modem2 Subnet Mask
upgrade license
(option) is
installed.
Description
Registers settings for manual connection to an access point.
Enter the SSID for the destination to connect.
Set the type of security for the destination to connect. Select
WPA if the type of security of the destination access point is
WPA or WPA2.
When Security is not set to None, enter the password for the
access point to connect.
Turns DHCP on/off.
Enter the IP address of the camcorder when DHCP is set to
Off.
Enter the subnet mask of the camcorder when DHCP is set to
Off.
Enter the default gateway of the camcorder when DHCP is set
to Off.
Turns auto DNS acquisition on/off.
Enter the primary DNS server of the camcorder when DNS
Auto is set to Off.
Enter the secondary DNS server of the camcorder when DNS
Auto is set to Off.
Turns the wired LAN function on/off.
Sets whether to enable remote control from a device
connected to the camcorder by wired LAN.
Configures properties of the wired LAN connection.
Turns DHCP on/off.
Enter the IP address of the camcorder when DHCP is set to
Off.
Enter the subnet mask of the camcorder when DHCP is set to
Off.
Enter the default gateway of the camcorder when DHCP is set
to Off.
Turns auto DNS acquisition on/off.
Enter the primary DNS server when DNS Auto is set to Off.
Enter the secondary DNS server when DNS Auto is set to Off.
Turns the modem/smartphone connection on/off.
Displays the device name of Modem1.
Displays the IP address of Modem1.
Displays the subnet mask of Modem1.
Displays the device name of Modem2.
Displays the IP address of Modem2.
Displays the subnet mask of Modem2.
115