Door Removal; Oven Exterior - Samsung BF1C4T043 User Manual

Oven Exterior

• For cleaning the exterior of the oven, use a clean cloth and a mild cleaning agent or warm
soapy water.
• Dry with kitchen roll or a dry towel.
• Do not use scourers, caustic cleaners or abrasive products.
Catalytic enamel surface (Optional)
The removable cover casing is coated with a dark gray catalytic enamel this can become coated
with oil and fat distributed by circulating air during convection heating. These deposits will burn
off at oven temperatures of 200 °C and higher, for example, while baking or roasting. Higher
temperatures will result in faster burning.
1. Remove all accessories from the oven.
2. Clean all interior oven surfaces as described in the hand cleaning section.
3. Set the oven to upper- and lower heat.
4. Set the heat to 250 °C.
5. Run the oven for approximately 1 hour. The length of time depends on the degree of soiling.
Any remaining soil will gradually disappear with each subsequent use of the oven at high
temperatures.
Stainless steel oven fronts
• Do not use steel wool, scouring pads or other abrasives. They may damage the finish.
Aluminium oven fronts
• Wipe the surface gently with a soft clean cloth or microfiber cloth and a mild window cleaning
detergent.
Accessory
• Wash the accessory after every use and dry it with a kitchen towel. If necessary, lay in warm
soapy water for about 30 minutes for easier cleaning.

DOOR REMOVAL

For normal use, the oven door must not be removed but if removal is necessary, for example, for
cleaning purposes, follow these instructions.
CAUTION: The oven door is heavy.
1. Open the door and flip open the
clips at both hinges completely.
BF1C4T043_BOL-00069K_EN.indd 9
➊
➋
2. Close the door by approximately 70 °. With both
hands, grasp the sides of the oven door at its
middle and pull-lift until the hinges can be taken
out.
cleaning and care_9
2011-01-07 8:02:53