Table of Contents
Advertisement
2.
Scroll to the frequency (or press .no to go to the next) and press E/yes to
unlock.
3.
Press Menu twice to return.
Note: You can also do this in search mode by pressing
then
L/O.
Broadcast Screen these settings determine whether the scanner automatically
ignores transmissions that are on common broadcasts, paging systems, and other
annoyance radio sources during Custom Search, Quick Search, or Close Call
Search.
Note: Broadcast screen is not effective during some service searches.
1.
Scroll to 'Broadcast Screen' and press E/yes.
2.
Scroll to 1 of 4 options and press E/yes.
Set All Bands On - turns on broadcast screen on for all bands. Press
Menu to return.
Set All Bands Off - turns off broadcast screen off for all bands.
3.
Press Menu to return.
Set Each Band - then scroll to each band and press E/yes to turn off
or on.
4.
Press Menu to return.
Pager - the scanner skips known paging system frequencies.
FM - the scanner skips known FM frequencies.
UHF TV - the scanner skips known UHF TV frequencies.
VHF TV - the scanner skips known VHF TV frequencies.
NOAA WX - the scanner skips known NOAA weather frequencies.
Band 1-10 - the scanner skips known frequencies for custom broadcast
ranges.
Program Band - Scroll to the custom band (1-10) and press E/yes.
1.
At 'Set Lower Limit' enter the lower limit of the frequency range and press E/
yes.
2.
At 'Set Upper Limit' enter the upper limit of the frequency range and press E/
yes.
3.
Scroll to the next band and repeat.
4.
Press Menu twice to return.
Tone/Code Search selects whether the scanner searches for CTCSS/DCS tones,
P25 NAC codes, or no codes in Search and Close Call modes. The scanner ignores
this setting in AM, WFM, and FMB bands.
91
Func
Advertisement
Table of Contents
