INCLUDED WITH YOUR SCANNER
Accessories included in the box are:
BCD325P2 Scanner
Printed Materials:
• Owner's Manual (English, French)
• APP Form
• FREQ Form
CONNECT THE ANTENNA
Connect the antenna to the antenna post. Press and twist the antenna onto the
connector to secure it.
USING BATTERIES
You can power your BCD325P2 using two alkaline or rechargeable AA batteries
1.
Remove battery cover and install 2 AA batteries, matching the polarity symbols
(+ -).
2.
Replace the cover.
Caution: There is no switch for the battery type. Never attempt to charge non-
rechargeable batteries. Non-rechargeable batteries can get hot or burst if you
try to recharge them.
If the scanner detects batteries that cannot be charge, it displays "Battery Error."
Not Shown:
• USB Cable
• Hand Strap
• Rechargeable AA Ni-Mh
• Belt Clip (attached)
Antenna
OPERATION BASICS
18
batteries (2)