Table of Contents
Advertisement
4
Adjust the camera angle.
R Loosen the screw (
the camera to the desired angle.
R Tighten the screw (
the screw (
2
secure.
1
) and then adjust
1
) while holding
1
) until the camera is
2
1
5
Attach the safety wire to the wall.
R Place the ring of the safety wire (A)
on the wall.
R Place the washer (B) on top of the
ring of the safety wire.
R Tighten the screw (C) for the safety
wire on top of the washer.
Note:
R Attach the safety wire while it is bent.
R Attach the safety wire high on the wall
so that the camera does not strike
anyone in the event the camera
detaches from the wall.
R Do not hang from the camera or stand.
Setup
1
2
3
21
Advertisement
Table of Contents
