Lennox Hearth Products SUPERIOR SVFS32NEVF Owner's Operation And Installation Manual page 21

8. Rest rear log in back corner sections of
chassis assembly as shown in Figure 41.
Rear Log
Figure 41 - Installing Rear Log
9. Place the left top log onto the rear log and
the left middle log. Make sure to place the
f i r e - p a r t s . c o m
projection on the bottom of the left top log
into the recessed areas on the rear and left
middle logs (see Figure 42).
Left
Middle
Log
Figure 42 - Installing Left Top Log
10. Rest the middle crossover log onto the right
middle log and the left front log (see Figure
43). Make sure to match the projection on
the bottom of the crossover log with the
recess area in the right middle log and the
left front log.
11. Place the top rear log onto the rear log as
shown. The rear log has a projection that
will fit into the recess area on the bottom
of the top rear log (see Figure 44).
126544-01A
INSTALLATION
Continued
Left Top Log
Rear Log
www.lennoxhearthproducts.com
Middle
Crossover
Log
Figure 43 - Installing Middle Crossover Log
Top Rear
Log
Rear Log
Figure 44 - Installing Top Rear Log
EMBER PLACEMENT
WARNING: Do not use
any other ember material not
supplied with this unit.
WARNING: Do not operate
unit without ember material cor-
rectly in place as shown in Fig-
ures 46 & 47, page 22. Do NOT
place ember material anywhere
else on the unit. Use only em-
ber material supplied with unit.
Excessive or incorrectly placed
ember material may produce
carbon monoxide or soot.
21