Table of Contents
Advertisement
Introduction
Talk Button
Hi-Low Button
Hi Power Icon
Medium Power Icon
Low Power Icon
Operation
Time-out Timer
The Time-out Timer feature limits transmit time
to three (3) continuous minutes to extend battery
life and prevent accidental operation. After three
(3) continuous minutes of transmission, the
radio will stop transmitting and will require a rest
period of 30 seconds. During this time the
display will flash on and off, and an error tone
will sound if the Push-to-Talk button is pressed.
Selectable High•Medium•Low
Power Output
When in close proximity to another party or during
favorable conditions, you can switch from High to
Medium to Low Power to extend battery life.
This feature applies to GMRS Channels
1 through 7 and 15 through 22 only.
Channels 8 through 14 operate
exclusively on low power.
To switch from high to medium to low power:
– Press and release the Hi•Low button.
When in High Power and using Channels 1
through 7 and 15 through 22, the Hi icon will be
visible in the LCD display.
When in Medium Power and using Channels 1
through 7 and 15 through 22, the Med icon will
be visible in the LCD.
When in Low Power or while using channels 8
through 14, the Low icon will be visible in the
display.
When using an external speaker/
microphone accessory on channels 1-7
or 15-22, your microTALK
only operate on medium or low power.
Customer Assistance
Warranty
•
•
®
radio will
5
Advertisement
Table of Contents
