D-Link AirPlus G DI-524UP Manual page 23

Using the Configuration Menu (continued)
Advanced > Filters > IP Filters
Filters are used to deny or allow LAN (Local Area Network) computers from accessing
the Internet. The DI-524UP can be setup to deny internal computers by their IP or MAC
addresses. The DI-524UP can also block users from accessing restricted web sites.
IP Filters:
IP Address:
Port Range:
Protocol Type:
Schedule:
IP Filter is used to deny LAN IP addresses from accessing
the Internet. You can deny specific port numbers or all ports
for the specific IP address.
The IP address of the LAN computer that will be denied
access to the Internet.
The single port or port range that will be denied access to the
Internet.
Select the protocol type
This is the schedule of time when the IP Filter will be enabled.
23