D-Link AirPlus G DI-524UP Manual page 17

Using the Configuration Menu (continued)
Home > WAN > PPPoE continued
MTU-
Auto-reconnect-
LAN is short for Local Area Network. This is considered your internal network. These are
the IP settings of the LAN interface for the DI-524UP. These settings may be referred to
as Private settings. You may change the LAN IP address if needed. The LAN IP address
is private to your internal network and cannot be seen on the Internet.
IP Address-
Subnet Mask-
Local Domain-Name-
Maximum Transmission Unit-1492 is the default setting-you
may need to change the MTU for optimal performance with
your specific ISP.
If enabled, the DI-524UP will automatically connect to your ISP after
your system is restarted or if the PPPoE connection is dropped.
Home > LAN
The IP address of the LAN interface. The default IP address
is: 192.168.0.1
The subnet mask of the LAN interface.
The default subnet mask is 255.255.255.0
This field is optional. Enter in the local domain name.
17