Water Supply Container - Hitachi R-G500GS How To Use Manual

MAINTENANCE

Water supply container

Remove the water supply container, and
1
then the lid.
Take up the near side of the lid toward in the direction of the arrow,
and then remove it.
2
Remove the gasket from the lid and then the case.
Turn the case and remove it from the lid.
3
Remove the water filter from the case.
Pinch the tab of the water filter with fingers to unset it from the fork,
and then remove the case.
4
Rinse each part of the water supply container
in water.
Wash it with a soft wash sponge etc.
Do not use the detergents etc.
Request
● Dry out the water filter to prevent molds and guck.
Notice
● Replace the water filter normally every 3 - 4 years.
5
Attach each part to the water supply
container, pour water in and then set it.
Insert the lid from its rear side and close it in the direction of the arrow.
Notice
● Dechlorinated water such as mineral water, well water, filtered water, cool water after boiling and others tends to cause water stain / slime compared with tap
water. So it is recommended to maintain once every 3 days.
● When the Ice Maker is not used for more than 1 week, dry out the water supply container, and then set it in place (dry out the water filter, among others).
When not used for more than 1 week, it is recommended to start Ice Maker Cleaning before use.
62
(CONTINUED)
Once a week
Pg.70
Fork
Tab
Pg.60
Lid
Gasket
Case
Water filter
Water supply
container