Vacuum Compartment - Hitachi R-G500GS How To Use Manual

Vacuum Compartment

Pull out the Vacuum Case.
1
For how to remove,
Be sure to remove foods contained in the Vacuum Case.
2
Wipe off following parts with a soft cloth
which is steeped in lukewarm water.
※ Do not use the detergents, etc.
Aluminum Tray
Vacuum
compartment
gasket
Request
● Do not disassemble or wash the Platinum Catalyst Case
with water.
● If detergents and others except lukewarm water are used to clean
the vacuum compartment gasket, the vacuum compartment
gasket may be damaged, deformed or change in color, which
may cause the vacuum state unable to keep well.
3
Attach the Vacuum Case.
For how to attach,
How to mount Platinum Catalyst Case,
Loosened vacuum compartment gasket or loose-fitting door of the
Vacuum Case may cause the vacuum state unable to keep well.
Once a month
Pg.64
Vacuum Compartment
Vacuum
Gasket seat
Container
Platinum Catalyst Case
Pg.64
Pg.45
When the Vacuum Compartment Gasket is dirt
Remove the vacuum compartment gasket
1
from the Vacuum Case.
Grasp the tab of the vacuum
compartment gasket on the
observer ' s upper right and
remove it by hand carefully.
2
Rinse dirty portion in water using a soft sponge, etc.
※ Do not use the detergents, etc.
3
Wipe off excess moisture with a dry
cloth and dry it out naturally.
4
Wipe off dirt in the vacuum
compartment gasket
mounting groove.
Groove for attaching the vacuum compartment gasket.
5
Attach the vacuum compartment gasket.
Align the tab to the notch accurately, and then combine
them together.
Tab
Tab
Notch of the groove
61