Network Connection - Samsung LE32D550K1W User Manual

5 series

E-manual (196 pages)

User manual (145 pages)

Table of Contents

You can set up your TV so that it can access the Internet through your local area network (LAN) using a wired or wireless

connection.

Network Connection - Wireless

You can connect your TV to your LAN through a standard wireless router or modem. To connect wirelessly, you must first

attach a "Samsung Wireless LAN Adapter" (WIS09ABGN, WIS09ABGN2, WIS10ABGN - sold separately) to either the USB or

USB1 (HDD), USB 2 port on the back of your TV. See the illustration below.

The LAN Port on

the Wall

LAN Cable

Samsung's Wireless LAN adapter is sold separately and is offered by select retailers, Ecommerce sites and Samsungparts.

com. Samsung's Wireless LAN adapter supports the IEEE 802.11a/b/g and n communication protocols. Samsung

recommends using IEEE 802.11n. When you play the video over a IEEE 802.11b/g connection, the video may not play

smoothly.

Most wireless network systems incorporate a security system that requires devices that access the network through an access

point or wireless router (typically a wireless IP Sharer) to transmit an encrypted security code called an access key.

If Pure High-throughput (Greenfield) 802.11n mode is selected and the Encryption type is set to WEP, TKIP or TKIP AES

(WPS2Mixed) for your wireless router, Samsung TVs will not support a connection in compliance with new Wi-Fi certification

specifications.

Network Connection - Wired

There are two main ways to connect your TV to your network using cable, depending on your network setup. They are

illustrated below:

The Modem Port on the Wall

The LAN Port on the Wall

✎

A network speed of lower than 10 Mbps is not supported.