Rheem Raypak Hi Delta P902C Installation & Operating Instructions Manual page 46

View Menu
The "View" icon is turned on. BOILER and 1 segment are turned on if BOILER 2, 3 or 4 are set to ON.
Item Display Range
---, -76 to 149ºF
OUTDOOR
---, -22 to 266ºF
TARGET
"----", -22 to 266ºF
POOL
----, -22 to 266ºF
TANK
---, -22 to 266ºF
SUPPLY
---, -22 to 266ºF
IND SUPPLY
---, -22 to 266ºF
Boil OUTLET
---, -22 to 266ºF
Boil INLET
0 to 252ºF
Boil ∆T
---, -22 to 266ºF
DHW Supply
IDLE, POST, PREP,
Boiler 1
STG 1, 2, 3, 4
IDLE, POST, PREP,
Boiler 2, 3, 4
STG 1, 2, 3, 4
When is it Displayed
MASTER
PIM Identity is H
TARGET = RSET
MASTER
MODBUS RATE
EMS RATE
PIM Identity is P
PIM Identity is WH
MASTER
PIM Identity is H MODE = 3
Always
Always
Always
MASTER
PIM Identity is H
MODE = 2 OR 3
DHW SENSOR = ON
MASTER
MASTER
Table O: View Menu
46
Description
Outdoor air temperature, the number field displays "----" if OUT-
DOOR sensor has a fault.
Current target water temperature, the number field displays "----"
when there is no current target.
Current pool temperature, the number field displays "----" if the pool
sensor fails.
Current system supply temperature, the number field displays "----" if
Tank sensor fails.
Current system supply temperature, the number field displays "----" if
the SUPPLY
Current temperature being supplied to the indirect, the number field
displays "----" if the indirect DHW sensor fails.
Current boiler outlet temperature as communicated from the PIM,
the number field displays "----"
Current boiler outlet temperature as communicated from the PIM,
the number field displays "----" if the outlet sensor fails.
Current boiler inlet temperature as communicated from the PIM, the
number field displays "----" if the inlet and/or outlet sensor fails.
Current Indirect DHW Supply temperature, the number field displays
"----" if the DHW sensor has a fault.
Shows the operation status of master boiler.
Shows the operation status of all boilers in cascade.